VGA & Audio Receiver
Quick Installation Guide
Introducing the VGA & Audio Receiver
The VGA & Audio Receiver receives VGA video and stereo
audio transmissions from a transmitter over one
economical CAT5e cable.
FeaturesandBenefits
•
ReceivesVGAvideoandstereoaudiotransmission
over one economical CAT5/5e/6 cable
•
•
Support 2-channel stereo audio
SupportsVGA,SVGA,XGA.SXGAandMulti-sync
monitors
•
•
Distance: up to 1080ft (330m) @ 800x600 resolution
Resolution: up to 1920 x 1200 @ 246ft (75m)
PackageContents
•
•
•
VGA & Audio Receiver
Power adapter (5V DC)
QuickInstallationGuide
Serial Number Sticker
For future product return or exchange this serial number
is needed. Please keep it for your reference.
04-0547B
1
Hardware Installation
UsehighqualityCAT5e/6cabletoensurethebestpossible
display quality up to the maximum supported distance.
1.
Connect one end of a CAT5e/6 cable to the VGA +
Audio Input and the other end to an RJ45 port on
the transmitter.
2.
3.
4.
Connect the VGA Out to your VGA display.
Connect your speakers to the Speaker Jack.
Insert one end of the power adapter into the Power
Connector, then plug the other end into a reliable
power source. Power on all devices.
Important: ThisVGA&AudioReceiveronlyworks
with the following SIIG Transmitters:
-8-PortVGA&AudioTransmitter(CE-VG0221-S1)
-4-Port VGA & Audio Transmitter (not released)
-VGA&AudioTransmitterfromCE-VG0112-S1kit
3
Operating Settings
This section describes how to adjust the VGA & Audio
Receiver for the best audio and video viewing experience.
Audio Switch
•
Stereo: 2 channel stereo sound
•
Mono: normal sound
BrightnessKnob
Turnthisknobtoincreaseordecreasethebrightnessofthe
screen.
Focus Knob
Turn this knob to adjust the sharpness of the screen.
4
Blank Page
5
Blank Page
6
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web
updated daily with new drivers and solutions. Answers to your questions
could be just a few clicks away. You can also submit questions online and a
technical support analysts will promptly respond.
SIIGoffersa3-yearmanufacturerwarrantywiththisproduct. Pleaseseeour
websiteformorewarrantydetails. Ifyouencounteranyproblemswiththis
product, pleasefollowtheproceduresbelow.
Ifitiswithinthestore'sreturnpolicyperiod,pleasereturntheproducttothe
store where you purchased from. If your purchase has passed the store's
returnpolicyperiod,pleasefollowthesestepstohavetheproductrepairedor
replaced.
Step 1: Submit your RMA request.
to submit a request to SIIG RMA. If the product is determined to be
defective, an RMA number willbeissued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came
withtheoriginalpackagemustbeincluded.
•
ClearlywriteyourRMAnumberonthetopofthereturnedpackage.
SIIG will refuse to accept any shipping package, and will not be
responsibleforaproductreturnedwithoutanRMAnumberposted
ontheoutsideoftheshippingcarton.
•
•
Youareresponsibleforthecostofshipping. Shiptheproducttothe
followingaddress:
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA#:
SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
7
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturerofI/O
connectivityproducts,includingPCI&ISAserialandparallelports,USB,Serial
ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards,
andotheraccessories. SIIGisthepremierone-stopsourceofupgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
and are backed by an extensive manufacturer warranty. High-quality control
standards are evident by the overall ease of installation and compatibility of
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors, systemintegrators, andVARsintheAmericasand
theUK,andthroughe-commercesites.
PRODUCT NAME
VGA & Audio Receiver
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Ph: 510-657-8688
VGA & Audio Receiver is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarksofSIIG,Inc. Othernamesusedinthispublicationareforidentificationonlyand
may be trademarks of their respective companies.
March, 2012
Copyright © 2012 by SIIG, Inc. All rights reserved.
|