4 Port SATA 6Gbps PCIe Controller
w/Shared eSATA
PEXSAT34
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 12/06/2011
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements.............................................................................................................................. 1
Installation ..............................................................................................2
Shared eSATA Port .................................................................................................................................... 2
Hardware Installation .............................................................................................................................. 2
Driver Installation...................................................................................................................................... 3
Verifying Installation................................................................................................................................ 4
Specifications..........................................................................................5
Technical Support ..................................................................................6
Warranty Information............................................................................6
Instruction Manual
i
Introduction
The PEXSAT34 4-port PCI Express (x4) SATA 6Gbps Controller Card adds 4 internal
SATA ports, along with a shared eSATA port to a desktop computer. Providing both an
internal and external SATA 6Gbps connectivity solution from a single card. Compliant
with SATA revision 3.0, this SATA controller card provides up to 6Gbps of data
bandwidth to utilize the speeds of high performance hard drives and Solid State Drives
(SSD). Along with Port Multiplier (PM) support on each port, allowing for multiple SATA
drives to be connected over a single cable.
Packaging Contents
•
•
•
•
1 x PCI Express SATA Card
1 x Low Profile Bracket
1 x Driver CD
1 x Instruction Manual
System Requirements
•
•
PCI Express enabled computer with available x4 PCI Express slot
Microsoft® Windows® XP/ Server 2003/ Vista/ Server 2008 R2/ 7 (32/64-bit), or
Apple® Mac OS® 10.6/ 10.7, or Linux®
Instruction Manual
1
Installation
WARNING! PCI Express cards, like all computer equipment, can be severely
damaged by static electricity. Be sure that you are properly grounded before
opening your computer case or touching your PCI Express card. StarTech.com
recommends that you wear an anti-static strap when installing any computer
component. If an anti-static strap is unavailable, discharge yourself of any
static electricity build-up by touching a large grounded metal surface (such
as the computer case) for several seconds. Also be careful to handle the PCI
Express card by its edges and not the gold connectors.
Shared eSATA Port
The eSATA port on this card is shared with internal SATA port 1 (SATA1). Only one will
function at a time and must be selected using the DIP switch on the card. Do not
change the DIP switch on the card while the computer is running.
DIP Switch
SATA2
SATA4
SATA1
SATA3
Hardware Installation
1. Turn your computer off and any peripherals connected to the computer (i.e. Printers,
external hard drives, etc.). Unplug the power cable from the rear of the power
supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. See documentation for your computer
system for details.
Instruction Manual
2
3. Locate an open PCI Express x4 slot and remove the metal cover plate on the rear of
the computer case (Refer to documentation for your computer system for details.).
Note that this card will work in PCI Express slots of additional lanes (i.e. x8 or x16
slots).
4. Gently insert the card into the open PCI Express slot and fasten the bracket to the
rear of the case.
NOTE: If installing the card into a small form factor/low profile system, replacing the
pre-installed full profile bracket with the included low profile installation bracket may
be necessary.
5. Connect SATA cables from the ports on the card to the SATA devices inside the
computer.
6. Place the cover back onto the computer case.
7. Insert the power cable into the socket on the power supply and reconnect all other
connectors removed in Step 1.
Driver Installation
Windows XP/Server 2003/Vista/Server 2008 R2
1. After installing the card into the computer system, boot up the computer.
2. Once logged into Windows, the Hardware/Driver installation wizard should appear.
Insert the Driver Installation CD into the CD/DVD drive when prompted.
3. Windows should automatically start to search the CD for the appropriate drivers.
This may take several minutes.
4. Once Windows has located the drivers and installed them, the card should be ready
for use.
Windows 7
No driver installation is required for Windows 7, as the controller card is natively
supported, so the drivers are already installed.
Instruction Manual
3
Verifying Installation
Windows XP/Server 2003/Vista/Server 2008 R2/7
From the main desktop, right-click on “My Computer”(“Computer”in Vista or later),
then select “Manage”. In the new Computer Management window, select Device
Manager from the left window panel.
Under the “SCSI and RAID Controllers”category (“Storage Controllers”in Vista or later),
should be a “Marvell 91xx”device. Right-click on the device and select “Properties”to
make sure it is installed and working correctly.
For Windows 7, if using the native drivers, the card will instead be listed under the “IDE
ATA/ATAPI Controller”category as a “Standard AHCI”device.
Instruction Manual
4
Specifications
PCI Express 2.0
Host Interface
Form Factor
Chipset ID
SATA revision 3.0
Full/Low Profile
Marvell 88SE9128
PLX PEX8604
External Connectors
Internal Connectors
Maximum Data Transfer Rate
RAID Support
1 x eSATA receptacle
4 x 7-pin SATA receptacle
SATA: 6 Gbps
No
Port Multiplier
Yes*
Operating Temperature
Storage Temperature
Humidity
0°C ~ 50°C (32°F ~ 122°F)
-20°C ~ 60°C (-4°F ~ 140°F)
5% ~ 85% RH
Dimensions
121.0mm x 130.0mm x 19.0mm
100g
Weight
Windows XP/ Server 2003/ Vista/
Server 2008 R2/ 7 (32/64-bit),
Mac OS 10.6/ 10.7, Linux
Compatible Operating Systems
*Port Multiplier not supported Mac OS
Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
6
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
|